Cut deep for training, sewn for gym ranges
We work as a stringer vest manufacturer for gym brands, fitness labels and supplement ranges that want the classic deep-cut training vest made properly: narrow straps, armholes cut low, and a racer back that leaves the shoulders and back free through every set. Buyers in the USA, UK, Germany, Canada and Australia run this style because it is the vest serious lifters reach for, and because a plain, well-cut stringer carries a brand’s print better than any other gym garment. Every order is made to your level: your quality, your fabric, your design and your measurement, and the approved sample is held as the standard every production piece is checked against.
A light cotton blend jersey that moves with the lifter
The cloth is a single jersey in a cotton blend at 160 to 180 GSM: light enough to train in without overheating, firm enough to hold the deep cut of the armholes without the edges curling or sagging after washing. The cotton gives the vest a natural hand feel against the skin, and the blend keeps the shape through the heavy wash cycle gym wear goes through at home. Maroon is the colour programmes return to on this style, and your own colours are dyed to your standard and approved on a sample before bulk. Every lot is inspected for knitting faults and shading before it reaches the cutting table, so the vest in the last carton matches the one in the first.
Held to the same cut on every repeat order
Gym ranges live on repeats: the member who buys a stringer this spring comes back for the same vest in a new colour next season, and he notices at once if the straps sit narrower or the armholes ride higher. Most buyers found us while looking for a gym stringer supplier who could hold one approved cut across many runs, and stayed because the pattern, the dye standard and the measurement chart are kept from the first order. Size and care labels are set in your format, fibre content is declared exactly as knitted, and cartons are marked with style, colour and size breakdown so your warehouse can book the goods straight in.
Narrow straps, deep armholes and a racer back
The stringer is defined by its cut. The shoulder straps are narrow, the armholes are cut deep at the front and back so the chest and lats stay visible and unrestricted, and the back narrows into the racer shape that gives the style its name. Binding at the neck and armholes is cut from the same cloth lot and sewn flat, so nothing rubs under load. The hem is straight and sits at the hip, the side seams are sewn to lie flat, and every vest is checked at final inspection for strap width, armhole depth and symmetry between the two sides, because on a garment this open, a few millimetres show.
Straps and binding are the first places a lightly made stringer fails, so the binding is double-stitched at the shoulder join and the armhole edge is tested on the sample through repeated stretching before the pattern is locked. The back panel is cut in one piece so the racer shape sits symmetrically, and the finished vest is measured laid flat and again after a wash test at sampling, so the depth your customers try on in the shop is the depth that comes back out of their wash. Nothing is left loose or raw inside: every seam allowance is trimmed and finished so the vest feels as clean against the skin as it looks on the rail.
Print and embroidery on an open chest
With the chest and back this open, the print field is small but it is the part everyone sees, so designs are struck off on the correct weight of jersey and approved by you before bulk. Chest prints sit centred against the finished garment’s measurements, and small embroidery is stitched with a backing chosen for light jersey so the mark stays flat. Clubs and stores taking bodybuilding stringer wholesale usually run the same vest printed for one range and plain for another, and we keep the base garment identical either way. Your woven label is sewn at the neck during production, size markings follow your format, and hang tags and packaging are fitted at finishing.
Sized S to XXL on your own measurement chart
Sizes run from S to XXL on a grading worked from your own measurement chart, with strap width, armhole depth, chest and body length set at sampling and the pre-production sample measured point by point before the pattern is locked. The mens stringer tank is cut on a men’s athletic block, longer in the body than a standard vest, and each size is checked against the chart at final inspection. The stringer sits inside our wider tank tops and vests range, alongside the unisex tank top for a standard cut, the gym vest for a closer training fit and the mesh training vest for team sessions. Sampling starts from a tech pack or a reference sample through our how to order page.
What stringer vest buyers ask us
The questions we hear most about this vest, answered plainly.
We run a gym brand in the USA. Can the chest carry our print?
Yes. The chest panel is small but flat and clean, and your design is struck off on the correct jersey weight and approved by you before bulk. Print position is measured against the finished garment on every size, so the mark sits in the same place on an S as on an XXL.
Can we run maroon and black together in one order for the UK?
Yes. Colours can be mixed inside one order, and each colour is dyed and approved as its own lot before cutting. Cartons for the UK are marked by style, colour and size breakdown, and labels are set in your format.
What is the minimum order for stringer vests?
The minimum is 800 pieces per colour, with a minimum of 3,000 pieces per order. Colours, sizes and styles can be mixed inside that order total, so maroon and black stringers in a full size run can sit together in a single order.
Do you charge for samples, and how long does production take?
Yes. Samples, including sales samples made to the approved standard, are costed individually and billed, so the cut, the straps and the print are all approved before bulk. Once the sample is approved, production for basic fabrics usually takes 30 to 60 days.





