Made to your level: your quality, your fabric, your design and your measurement[email protected]
Home  /  Tank Tops & Vests  /  Gym Vest
Gym vest in cotton jersey from a gym vest manufacturer in Bangladesh
Gym vests cut deep at the armhole in cotton jersey, with binding sewn to hold under strain and your label fitted.

Gym Vest

A gym vest made in Bangladesh for training wear. Deep-cut armholes, binding sewn to hold under strain, and a body graded for movement, with your print and woven label fitted.

Fabric
100% cotton single jersey and cotton-poly blends
Weight
160 to 200 GSM
Sizes
XS to XXL
Colours
white, grey and your colours
Customising
print, your woven label and gym programme packing
Origin
Made in Bangladesh

View cart and checkout

Related products

Built for training, cut for movement

We are a gym vests manufacturer in Bangladesh, and this vest is cut for the training floor rather than the beach. The armholes are dropped deep so the shoulder and back move without the fabric catching, the neckline sits open, and the body is graded with room through the chest so the garment works through a full session instead of riding up or pulling across the back. It is a working garment, and it is finished like one: binding sewn down firmly, seams set to take repeated washing, and nothing on it that does not earn its place. Every order is made to your level: your quality, your fabric, your design and your measurement, so the vest your members train in this season is the vest they are issued next season. Reorders come back to the same approved cut and shade.

Jersey weights that survive the wash bag

Plain cotton single jersey carries most gym programmes: it breathes, takes print well and stands up to the frequent hot washing training kit goes through. Cotton-poly blends are offered where easy care and faster drying matter, for kit that is washed daily and turned around quickly. Weights run from 160 to 200 GSM. The lighter end suits high-volume team and event programmes; the heavier jersey gives a firmer body that holds its shape worn session after session. Fabric is rested before cutting so measurements stay true, every lot is checked for knitting faults, and the binding is cut from the same lot as the body so the neckline and armholes match the garment shade for shade.

Chest prints and team marks, placed to be seen

Most gym vests carry a mark: a gym’s name across the chest, a team crest, a sponsor panel on the back. Screen printing is handled in house, with positions measured against the finished garment and set low enough to clear the deep armhole curve, and every design is sampled on the correct cloth and weight for your approval before bulk. Your woven label is sewn at the back neck or side seam during production, and size markings follow your format. As a gym tank supplier, we keep the undecorated vest identical to the printed one, so printed staff vests and plain member vests match in cut, cloth and shade.

Deep armholes and binding that holds

The armhole is the making of this garment, and its depth, curve and strap width are set from your measurement chart at sampling, alongside chest, body length and neckline drop. Sizes run from XS to XXL. A deeper cut serves lifting and bodybuilding programmes; a slightly raised armhole serves general fitness ranges where more coverage is wanted. The binding is the point that fails first on a cheap vest, so it is applied under even tension, stitched to hold through stretching and washing, and checked around the full curve on finished garments. The pre-production sample is measured point by point against your chart and approved by you before the production pattern is locked, so the movement you tested in the sample is the movement the bulk delivers.

Gym Vest Supplier in Bangladesh for Australia Brands

Australian gym brands and supplement and apparel labels build their training ranges on this vest, taking workout vests for gyms and brands’ retail lines alongside the kit they issue in their own facilities. The Australian trade runs on the southern summer, so programmes are planned with production scheduled ahead of it, core white and grey running as year-round colours and seasonal shades added for campaign drops. We hold the approved cut, print positions and colour standards on file for each brand, so a reorder placed for a new gym opening or a challenge campaign comes back matching the vests already on the shop floor, packed by size and ready to split across locations.

Gyms and brands that kit out their members

Gym chains, training brands, sports clubs and importers in the USA, UK, Germany, Canada and Australia order this vest as staff kit, member merchandise and retail training wear, taking training vests wholesale against a held standard rather than re-sampling every season. Independent gyms and smaller clubs come through the same route at workout vest wholesale level, held to the identical standard rather than a cheaper make, and several buyers consolidate further, taking training singlets bulk Bangladesh programmes on the same shipment so both garments arrive under one packing list. It sits inside our wider tank tops and vests range, and buyers who want the same cloth in a closer retail cut step across to the men’s tank top, graded on the same base. Buyers who also run an underlayer line add our singlet undershirt to the same order. Packing is set for programmes: vests are folded and bagged by size, cartons are marked with the style, colour and size breakdown in your format, and multi-site orders can be split by location at packing, so each gym receives its own sizes.

What gym buyers ask before the first order

Questions we are asked about this gym vest, answered plainly.

How deep can the armholes be cut?

As deep as your programme needs. Armhole depth is a pattern point, set at sampling from your figures or a reference vest: a dropped, open cut for lifting ranges, or a higher cut where your members want more coverage. The binding width and strap are adjusted with the depth, so the garment still sits cleanly on the shoulder, and the approved cut is held across the full size run.

Will the binding survive daily washing?

That is what it is specified for. The binding is cut from the same cloth lot, applied under even tension and stitched to hold through repeated washing, and finished vests are checked around the full armhole and neckline curve before packing. On the cotton-poly blend the recovery is stronger again, which is why daily-wash programmes in gyms and clubs usually choose it.

We run gyms across the USA. Can cartons be split by location?

Yes. Multi-site orders are packed by location at our end, each carton marked with its destination, sizes and colour breakdown, so your distribution centre or the gyms themselves can receive their own stock without re-sorting. The split is agreed at sampling and shown on the packing list, and the same split can be repeated on reorders, so every site is restocked in the same proportions each time.

How are orders shipped to our distributor in the Netherlands?

Finished cartons are prepared for shipment from Bangladesh to your named port or forwarder, packed and marked to your instruction. As the exporter on the order, we coordinate the handover documents with your agent or consolidator, and most Dutch programmes route through Rotterdam, with the packing list matched piece for piece to the cartons, so your distributor can clear, book in and split the goods to your gyms or stores without delay.