A breathable bib for training days, made to be worn hard
We work as a mesh training vest manufacturer for football clubs, schools, academies and sports programmes that hand out bibs at every session and need them to survive a season of washing. The vest is sleeveless with open sides, cut loose so it slips over a shirt or a jacket, and made in a mesh that lets air move while players train. Buyers in the USA, UK, Germany, Canada and Australia run this style in their own colours because a set of bibs in club colours reads as one team from the first drill. Every order is made to your level: your quality, your fabric, your design and your measurement, and the approved sample is held as the standard every production piece is checked against.
Open sports mesh that lets the air through
The cloth is a sports mesh in 100% polyester at 120 to 140 GSM, knitted with open holes across the whole garment so heat escapes during training. Polyester holds its colour through the constant washing bibs go through, dries fast between sessions, and does not go heavy when it gets wet. Royal blue is the colour programmes return to, and your own team colours are dyed to your standard and approved on a sample before bulk. Every lot is checked for knitting faults and shading before cutting, so a set of twenty bibs reads as one colour on the pitch.
The mesh is chosen for the life bibs actually lead: dragged from a kit bag, worn for an hour, washed with the rest of the training kit and hung up to dry before the next session. The holes in the knit are small enough that the vest keeps its shape and does not snag on boots and balls in the bag, and the colour runs through the yarn itself, so a scuffed surface never shows a paler thread underneath. The cloth also takes print cleanly: the open knit is held flat through the print pass so numbers land solid and sharp instead of broken across the holes. Sets are counted and bundled by colour and size before cartoning, so a coach opening the box finds complete sets ready to hand out at the first session of the season.
The same colours, run after run
Training kit is reordered in pieces: a set lost here, new players there, a second squad next season. Buyers who come to us as their sports bib manufacturer judge us on whether the new set matches the old one exactly: same blue, same mesh weight, same print position. The dye standard, the artwork file and the measurement chart are held from your first order, so a top-up set sews and prints to the bibs your players already wear. Cartons are marked with style, colour and size breakdown, and where one order serves several squads or schools, packing is split and labelled by destination at our end, following your instruction sheet.
Open sides and bound edges that survive the wash bag
A bib has no sleeves and no closures; its construction is its edges. The neck and armholes are bound with a firm binding from the same mesh family, sewn so the edge keeps its shape when the vest is pulled on and off over kit many times a day. The sides are open below the armhole with a sewn join at the hip, so one size fits over both a summer shirt and a winter jacket. Every vest is checked at final inspection for binding, stitching and print position, and loose threads are trimmed before packing.
Numbers and badges printed to your layout
Bibs are printed, not plain: a number on the back, a badge on the chest, sometimes a sponsor line. Your artwork is set against the finished garment’s measurements and approved by you on a sample before bulk, so the number sits centred on every size. As a mesh practice vest supplier we print each vest to your layout sheet, with numbers running in the sequence you give us, and we check the sequence again at packing so a set arrives complete. Clubs taking training bibs wholesale usually order two colours at once, home and away sets, and both are printed from the same artwork so the identity holds across the set.
One size and sized options for every age group
The standard vest is one size for adults, and sized options run for junior and youth groups so the bib sits at the right length on smaller players. Measurements are set at sampling from your chart, and the pre-production sample is checked point by point before the pattern is locked. The vest sits inside our wider tank tops and vests range for sleeveless training wear, and it pairs with the team sports jersey for match day and the stringer vest for gym work. Sampling starts from a tech pack or a reference sample through our how to order page.
What training vest buyers ask us
The questions we hear most about this vest, answered plainly.
We kit out school teams in Canada. Can each vest carry a different number?
Yes. Numbers are printed vest by vest from your layout sheet, in the sequence and sizes you give us, and the sequence is checked again at packing. The sample vest is printed and approved by you before the full set is made.
Can we run royal blue and red sets in one order for Australia?
Yes. Colours can be mixed inside one order, and each colour is dyed and approved as its own lot before cutting. Cartons for Australia are marked by colour and size breakdown, and packing can be split by squad or school following your instruction sheet.
What is the minimum order for training vests?
The minimum is 800 pieces per colour, with a minimum of 3,000 pieces per order. Colours, sizes and styles can be mixed inside that order total, so royal blue and red sets in full size runs can sit together in a single order.
Do you charge for samples, and how long does production take?
Yes. Samples, including sales samples made to the approved standard, are costed individually and billed, so the colours, the binding and the print are all approved before bulk. Once the sample is approved, production for basic fabrics usually takes 30 to 60 days.





