Made to your level: your quality, your fabric, your design and your measurement[email protected]
Home  /  Polar Fleece  /  Men’s Micro Fleece Jacket
Micro fleece jacket manufacturer mens royal blue lightweight full zip
A men's micro fleece jacket in royal blue: the lightweight layer made to the buyer's specification.

Men’s Micro Fleece Jacket

A men's lightweight jacket in fine micro fleece, made in Bangladesh for layering, travel and workwear programmes where a full polar fleece is too warm.

Fabric
100% polyester micro fleece, anti-pill finish
Weight
180 to 220 GSM
Sizes
S to XXL (men’s)
Colours
Royal, charcoal melange, forest and your colours
Customising
Embroidery, pack-away pouch option, your woven label and packaging
Origin
Made in Bangladesh

View cart and checkout

Related products

Warmth without the bulk

Buyers come to us as a micro fleece jacket manufacturer when a full polar fleece is too warm or too bulky for the job. Micro fleece is knitted from finer yarn, giving a thinner, lighter cloth with a smooth, close surface, and this men’s jacket is made in it as a full-zip layering piece for travel, work and mild weather. It packs small, dries quickly and sits comfortably under a shell or over a shirt. The jacket is made to your specification and finished with your label and your packaging, and nothing carries our name. Every order is made to your level: your quality, your fabric, your design and your measurement. Layering programmes in the USA, UK, Germany, Canada and Australia run this style where a heavy fleece would spend the day carried over an arm rather than worn.

What makes micro fleece different

The difference is in the yarn and the knit. Finer polyester yarn is knitted tighter, then brushed lightly, so the cloth traps warmth without the loft of a standard polar fleece. The result is a jacket that weighs noticeably less than a mid-weight fleece, folds into a fraction of the space in a bag or a locker, and still takes the edge off a cold morning. The surface is smoother than standard fleece, so it slides under outer layers instead of gripping them, which is the whole point of a layering piece. It also resists pilling well, because the fibres are held closer in the tighter knit. An anti-pill finish is applied as standard, and that finish is checked at sampling by washing and rubbing the cloth, with bulk fabric held to the same standard before cutting.

Weights for layering, travel and work

At 180 GSM the jacket is a light layer for air-conditioned workplaces, travel and spring and autumn retail. At 200 to 220 GSM it becomes a working mid-layer for outdoor staff, delivery and facilities teams, and walkers who carry their warmth in a pack. Weight is set in your specification and checked on the bulk fabric before cutting, not taken from a swatch card. Colours run in royal, charcoal melange, forest and your own colours, dyed to your standard, with shade continuity checked across the whole order. The fabric is rested before cutting, so the finished jacket keeps its shape after washing, and the fine cloth is cut and sewn with the closer attention its lighter body needs at the seams and the zip.

Embroidery, pack-away options and your label

Chest embroidery sits cleanly on the smooth micro fleece face: sampled on the correct weight, approved by you before bulk, and positioned against the finished garment’s measurements, so it lands in the same place on every size in the run. A pack-away pouch can be built into the specification where your programme wants the jacket to fold into its own pocket or bag, a detail travel and outdoor retail buyers ask for by name. Your woven label is sewn at the neck during production, size and care labels are set in your format, and hang tags and packaging are fitted at finishing. As a mens lightweight fleece jacket supplier, we keep the base garment identical whether it leaves us plain or decorated, so uniform issues and retail pieces run from one approved block.

A men’s fit that moves with the wearer

Sizes run from S to XXL on a men’s grading worked from your own measurement chart. The cut is closer than a standard fleece jacket, because a layering piece should not bunch under a shell, but it keeps room through the shoulder and the arm for active work. Chest, body length, sleeve length and shoulder width are set at sampling, the pre-production sample is measured point by point against your chart and sent for your approval, and only that approval locks the pattern. Cuffs and hem are finished flat, so they sit smoothly under outer layers, the zip runs cleanly with a guard at the chin, and pockets are zipped where your specification calls for secure storage rather than open hand-warmers.

Where micro fleece sits in a range

Most buyers run micro fleece beside a standard polar fleece, not instead of it: the micro jacket as the light layer, the polar jacket as the winter piece, in matching colours under one label. As a thin fleece jacket manufacturer, we make both inside the same programme, so the two styles share labelling, packing standards and size charts, and arrive as one coherent range rather than two unrelated orders. The micro jacket sits in our polar fleece programme next to the men’s anti-pill polar fleece jacket, and buyers building a full fleece offer add the men’s hooded polar fleece jacket as the heavy tier above both.

Light to pack, checked like everything else

Each jacket is checked inline during sewing and again at final inspection, covering measurements, stitching, zip action, shading between pieces and surface finish, and a final measurement audit against your chart is recorded for each order before the cartons are sealed. Loose threads are trimmed, and pieces pass metal detection where your compliance programme requires it. Packing follows your instruction: folded singly in a polybag with your barcode or size sticker, packed into its pouch where that option is specified, or ratio-packed in cartons for your warehouse, marked with style, colour and size breakdown. Wholesalers take microfleece jacket wholesale across the full size run, and orders run through the sequence set out on our how to order page.

What micro fleece buyers ask us

The questions we hear most about this jacket, answered plainly.

We outfit teams in the USA. Will it layer under a shell jacket?

Yes, that is what it is made for. The cloth is thin and smooth-faced, the cut is closer than a standard fleece, and the cuffs and hem are finished flat, so the jacket slides under a shell without bunching at the arms or waist. The fit is proven on the pre-production sample against your chart before the pattern is locked.

What is the minimum order?

The minimum is 800 pieces per colour, with a minimum of 3,000 pieces per order. Colours, sizes and styles can be mixed within that order, so the micro jacket can be combined with standard polar fleece styles from the same programme to reach the total. The figures are confirmed with the quotation.

How long does production take for delivery to Spain?

For basic fabrics, production usually runs 30 to 60 days from sample approval, confirmed with the quotation against your delivery window. Finished cartons are then prepared for shipment from Bangladesh to your named port or forwarder, packed and marked to your instruction.

Does micro fleece pill like ordinary fleece?

Less readily, because the tighter knit holds its fibres closer, and the anti-pill finish applied to the cloth adds a further check. The finish is tested at sampling by washing and rubbing the fabric, and bulk cloth is held to the same standard, so the surface stays smooth through the garment’s normal working life.