One fleece programme for every wearer
We work as a polar fleece manufacturer bangladesh brands, importers and uniform buyers rely on when fleece has to cover a whole range, not a single style. From one production base we make full-zip jackets, quarter-zip and half-zip pullovers, sleeveless vests, hooded jackets and fleece joggers, in men’s, women’s, unisex, kids’ and baby fits. The buyer sets the fabric, the weight, the colours and the measurements; we make exactly that, and nothing carries our name. Every order is made to your level: your quality, your fabric, your design and your measurement, and the approved sample becomes the standard the whole order is checked against. Programmes are built for buyers in the USA, UK, Germany, Canada and Australia who return season after season because the fleece they approved is the fleece that arrives, in the weight, shade and fit they signed off.
Anti-pill, micro, sherpa and coral: four fleeces, four jobs
Polar fleece is a family, not a single cloth. Standard polar fleece with an anti-pill finish on both sides is the workhorse: warm, light and resistant to the bobbling that makes a cheap fleece look old after a few washes. Micro fleece is knitted finer and lighter, for layering, travel and uniforms worn indoors. Sherpa fleece carries a deep, high pile with the look of lambswool, made for winter retail. Coral fleece is plush on both faces, the soft option chosen for women’s lounge styles and baby garments. As a fleece clothing manufacturer bangladesh buyers can brief across all four, we prepare and finish each type to the weight in your specification, from 180 GSM micro fleece to 360 GSM sherpa, and we sample in the correct cloth before bulk, so the hand feel you approve is the hand feel you receive in every carton.
The styles buyers build ranges on
The core of the programme is the full-zip jacket, the style every fleece range is judged by, made in men’s and women’s fits with a stand collar, two pockets and a zip that runs cleanly from hem to chin. Around it sit the quarter-zip and half-zip pullovers for teams and retail, the hooded jacket for outdoor and workwear, the sleeveless vest as a layering piece, and fleece joggers for lounge and winter bottoms. Buyers who first find us as a polar fleece jacket manufacturer usually extend into the pullovers and vests once the jacket block is approved, because the same fabric story and the same labelling run through all of them. The range runs from the men’s anti-pill polar fleece jacket to the women’s sherpa fleece jacket and the unisex quarter-zip fleece pullover, with kids’ and baby styles at the younger end.
Your label on every garment
Nothing in the programme carries our branding. Your woven label is sewn at the neck during production, your hang tags and packaging are fitted at finishing, and embroidery or print carries your mark on the chest, the sleeve or the leg. Retail groups that once bought through a wholesale fleece jackets supplier move the programme to us when they want their own label inside the garment and their own size chart behind the fit, rather than a finished line made for someone else’s market. Zip pullers can be branded, drawcords and binding can be matched to your colours, and care labels are set in your format and your language. The garment leaves us as your product in every detail except the making, which is exactly how a private label range should arrive.
Weights, sizes and your measurement chart
Weights run from 180 to 360 GSM across the programme, chosen by style: lighter micro fleece for layering pieces, mid weights for the jackets and pullovers that sell all winter, and the heaviest sherpa for cold-weather retail. Sizes run from baby sizes through kids’ ages to men’s and women’s XXL, each fit graded from your own measurement chart rather than a house block. Chest, body length, sleeve length and shoulder are set at sampling, the pre-production sample is measured point by point against your chart, and only your written approval locks the pattern. Once locked, those figures are the standard every production piece is measured against, so a repeat order matches the first one garment for garment. The fabrics behind the programme are covered on our knit fabrics page.
Checked, packed and ready for your warehouse
Every garment is checked inline during sewing and again at final inspection, covering measurements, stitching, zip action, shading between pieces and cleanliness. Loose threads are trimmed, the fleece surface is checked for faults, and pieces pass metal detection where your compliance programme requires it. Packing follows your instruction: folded singly in a polybag with your barcode or size sticker, bundled for team issue, or ratio-packed in cartons for your warehouse, with style, colour and size breakdown marked on every carton so your side can book the goods in without re-sorting. Production runs inside our garment factory alongside our other knitwear, so fleece programmes carry the same inspection and packing discipline as every order we ship.
How a fleece order runs
Send a tech pack, a reference garment or a clear specification, and we first make a sample in the correct fleece and colour for your approval. Fit, weight, hand feel, embroidery position and label placement are checked against that sample, and bulk production only follows your written approval, so the order you receive matches the garment you signed off. The full sequence, from enquiry to shipment, is set out on our how to order page. Samples are costed and billed, and for basic fabrics production usually runs 30 to 60 days from approval, confirmed against your delivery window before the order is placed in the schedule.
Questions fleece buyers ask us
The questions we hear most before a first fleece order, answered plainly.
How do minimum orders work for buyers in Germany?
The minimum is 800 pieces per colour, with a minimum of 3,000 pieces per order. Colours, sizes and styles can be mixed within that order, so a German importer can cover a jacket, a pullover and a vest in one programme rather than ordering each style alone. The figures are confirmed with the quotation, against your specification.
Can we approve a sample in the USA before bulk production?
Yes, and we would not start without it. A sample is made in the correct fleece, weight and colour and sent for your approval; fit, hand feel, embroidery and label placement are checked against it, and bulk only follows your written approval. Samples are costed and billed, as they are made to your specification alone.
Will the anti-pill finish survive regular washing?
That is what it is tested for. The finish is applied to both faces of the cloth, checked at sampling by washing and rubbing the sample fabric, and bulk cloth is held to the same standard before cutting. It will not make a fleece immortal, but it keeps the surface smooth and saleable through the normal wash cycle the garment is sold for.
How do the goods reach us in Spain?
Finished cartons are prepared for shipment from Bangladesh to your named port or forwarder, packed and marked to your instruction with the size and colour breakdown on each carton. If you work through a buying agent or consolidator, we coordinate the handover documents with them, so delivery into Spain clears in line with your booking.

















