Made to your level: your quality, your fabric, your design and your measurement[email protected]
Home  /  Workwear & Uniforms  /  Hi-Vis Safety T-Shirt
Hi-vis safety t-shirt in fluorescent polyester mesh from a hi-vis safety t-shirt manufacturer in Bangladesh
Hi-vis safety t-shirts in fluorescent polyester mesh with reflective tape bands sewn to your own pattern, with your logo.

Hi-Vis Safety T-Shirt

A hi-vis safety t-shirt made in Bangladesh in fluorescent polyester, with silver reflective tape bands sewn across the body and over the shoulders to your own pattern. Your logo and your woven label.

Fabric
Fluorescent polyester mesh and interlock
Weight
160 to 200 GSM
Sizes
XS to XXL
Colours
hi-vis yellow and hi-vis orange
Customising
silver reflective tape on body and shoulders, logo print, your woven label
Origin
Made in Bangladesh

View cart and checkout

Related products

Seen clearly, worn all shift

We sew as a hi-vis safety t-shirt manufacturer in Bangladesh, making the top crews wear where being seen is part of the job: a fluorescent polyester body with silver reflective tape bands sewn across the body and over the shoulders, so the wearer stands out in daylight and shows up clearly under site lighting after dark. Every order is made to your level: your quality, your fabric, your design and your measurement. The tape layout is set from your own pattern at sampling and held for every repeat issue, so replacement tops match the ones already on site, band for band.

Fluorescent cloth, mesh or interlock

The body is polyester knitted at 160 to 200 GSM in two constructions. Mesh carries air through the garment and suits hot, outdoor work where the wearer is moving all shift; interlock gives a smoother, denser face that takes a printed logo cleanly and suits cooler months and mixed indoor and outdoor duties. Both are knitted in fluorescent yellow or fluorescent orange, and every lot is checked for shade before cutting, because hi-vis cloth that drifts between lots makes a crew look uneven even before the tape goes on. Fabric is rested before cutting so the finished measurements, and with them the tape positions, stay where the pattern puts them.

Tape bands placed to your pattern

The silver reflective tape is sewn on, never glued, in bands around the body and over the shoulders, placed to the layout on your pattern: band widths, the height of the body bands and the spacing over the shoulder are set at sampling and measured against the approved sample on every production. Print positions for your company logo are planned clear of the tape, so the mark stays readable and the bands run unbroken around the garment. As a hi vis tee supplier we treat the tape layout as part of the pattern itself, locked with the grading, so a reorder cannot quietly shift a band. Your woven label is sewn at the neck during production, with size markings in your format.

Hi-Vis Safety T-Shirt Supplier in Bangladesh for UK Wholesalers

UK wholesalers keep hi-vis basics in depth for the construction, logistics and warehouse trades, and this top is built for that trade pattern: one locked tape layout, steady fluorescent cloth and cartons packed by size so a wholesaler’s warehouse can pick and dispatch without opening and sorting. Size markings and care labels are fitted in the format your customers expect, and shade is checked lot by lot so repeat stock sits beside earlier deliveries as one range.

Sizes run from XS to XXL on a grading worked from your own measurement chart, with chest, body length and sleeve set at sampling and longer body lengths graded in where crews tuck tops into work trousers. Because the tape bands are positioned from the graded pattern, a size run keeps the same layout on a small frame and a large one, and the approved sample governs every reorder.

Tape measured before every carton closes

Each top is checked inline during sewing and again at final inspection, covering measurements, stitching and shading, with the tape bands measured against the approved pattern for position and spacing before the garment is folded. Loose threads are trimmed and the top is pressed. Packing follows your instruction: folded singly in a polybag with your size sticker, bundled by size for central stores, or split by depot so each site receives its own sizes. The style sits inside our wider workwear and uniforms range, and crews who need a plain heavy tee under the same programme run it beside the workwear t-shirt.

Who keeps crews visible in this top

Construction firms, logistics operators, uniform distributors, wholesalers and importers in the USA, UK, Germany, Canada and Australia keep their crews visible in this top. Uniform distributors carry it as a high visibility shirts wholesale line, and contractors take it among safety t-shirts bulk lines for dressing large, changing crews, because the layout and shade stay fixed from order to order. Sites that dress office and gate staff as well often pair it with the workwear polo shirt under the same label. Send your tape pattern, size chart and logo artwork and we will sample the finished top for your approval before bulk.

What safety wear buyers ask us

Questions buyers of safety wear put to us before a first order, answered plainly.

Can the tape layout follow our own pattern?

Yes. Send your pattern or a reference garment and the bands are placed to it: widths, body band height and shoulder spacing are set on the sample, measured and approved by you, and then held as part of the locked pattern. If your layout changes, we resample rather than adjust on the production line, so every garment in the order carries the same layout.

Mesh or interlock: which suits summer work?

Mesh, for most outdoor crews. Its open knit moves air through the garment on hot days and dries quickly between shifts. Interlock is the better choice where the top is printed with a large logo, where work moves between indoors and outdoors, or where the season is cooler. Both constructions carry the same tape layout and the same grading, so a programme can run mesh for summer and interlock for winter without changing supplier or standard.

Our depots are spread across Australia. Can cartons be split by site?

Yes. Cartons are packed and marked by depot at finishing, each with its own size breakdown, so a delivery arriving in Australia can be forwarded to sites without opening and re-sorting. Australian buyers usually schedule sampling ahead of their summer peak, which falls in the northern winter, and we plan production slots around that calendar so peak-season stock is sewn before it is needed.

How are hi-vis orders shipped to the USA?

Finished cartons are prepared for shipment from Bangladesh to your named port or forwarder, packed by size with the breakdown shown on each carton and the packing list matched to the contents before sealing. As the exporter on the order, we coordinate the handover documents with your agent or consolidator, so cartons moving into US distribution clear without your team chasing paperwork.